Contact for technical advice

For technical advice please contact our sales team at: 

Phone    +49 (0) 72 22 / 90 79 - 0
Fax        +49 (0) 72 22 / 8 12 74

Multistage mixer (Vibroreactor) type E

Horizontal or vertical, in-line and batch operation, up to 50,000 l/h




The PUC multistage mixer is especially well-suited for the production of emulsions and dispersions. It is used in the foodstuffs, pharmaceutical, chemical and petrochemical, and cosmetics industries for the wetting, comminution, mixing, de-agglomeration and homogenizing of liquid/solid mixtures. The rotor-stator system has a three-stage configuration and is equipped with an axial rotor. It is ideally adapted to the homogenizing process. The machine also allows defibration and can therefore be used in a wide variety of applications. The high degree of turbulence in the rotor-stator system reliably achieves extremely small droplet sizes and thorough distribution.

In many applications, the multistage mixer can replace high-pressure homogenizing as droplet sizes below 5 µm, which are adequate for many process applications, can be achieved. Frequently, the machine is connected to batch hoppers, mixing and agitator vessels to reduce mixing times or accelerate dissolving processes. These machines can process any material that can be pumped.

Type E

PUC type E multistage mixers are designed for in-line operation but can also be used for batch operation with an optional hopper. If required, type E multistage mixers can to be supplied with many widely used types of connection (threaded nozzle, flange, tri-clamp, etc.).


Type E multistage mixers are available in standard sizes with capacities between 150 and 50,000 l/h depending on the viscosity of the product.

The multistage mixers are supplied with standard stator-rotor combinations. Bespoke solutions are also available for special applications.


All units are available with various single and double-acting mechanical seals and with lip seals (PTFE) in accordance with FDA requirements. The seal is integrated in a seal mount which is identical for all types and sizes of multistage mixers. This facilitates the installation of the seal and later replacement with a different seal system, if necessary.


For most PUC multistage mixers, a variety of accessories and options are available, including:

  • ATEX (explosionproof) version
  • version designed for sterilization
  • feed and discharge pump
  • skid/angle foot
  • mobile version
  • frequency converter
  • IE3 standard motors for various voltages and frequencies
Application Multistage mixer Type Rating (kW) Dimensions Flow-rate l/h max.* (measured using water)
      Dimensions Length Width Height Flow-rate l/h max.* (measured using water)  
Laboratory B 60 2.2   600 250 300   6,000
Production B 100 5.7 - 9.2   719 340 320   20,000
Production B 130 11.0 - 18.5   861 340 410   30,000
Production B 150 15.0 - 22.0   865 380 410   50,000

*The values given above are purely indicative; the actual values depend on the material processed. Our technical department will design the optimum mill for your application.




A selection of industries which use type E vibroreactors and the products typically handled are listed in the table below. If you cannot find your application in the table, just contact us. Without any obligation, we will provide advice on the most suitable machine for processing your product.

Chemical goods
Emulsions Colours and Lacquers Resin oils Pesticides, herbicides, fungicides
Shower gels Bubble bath Shampoos  
Food & beverages
Fruit and vegetable juices Concentrated juice    
Petrochemical goods
Probst & Class General Product Information Colloid Technology
Probst & Class Colloid Technology Probst & Class Colloid Technology